 新闻搜索 |
|
| 推荐图片 |
|
|
|
|
|
房产沙盘模型这些细节不能放过，有些过程决定成败 |
|
（时间:2020/4/17 14:57:58） |
房产沙盘模型制作的整个过程是怎么样的？今天，杭州景文沙盘模型公司将给大家介绍一下。
a.首先，客户应该对房地产平面图和施工图进行深入的研究，装配景观根据布局方案和沙盘的比例来制作沙盘台子。
b.油漆喷涂部分根据建筑图纸的颜色调整相应的油漆颜色，喷涂在相应的PVC板上，送到设计景观进行雕刻。
c.设计景观根据施工图按比例对建筑结构进行设计，并在计算机上将其分解成不同的板。根据施工要求，设计景观设计了墙面图案、屋面砖边、窗户等。然后把它送到雕刻机上，在PVC板上刻出建筑物的板，然后送到生产景观。
d.生产景观按照设计景观的要求，按照指示和粘接方法，用三氯甲烷将PVC板粘合成建筑物的近似形状。窗户的形状直接刻在PVC板上，薄透明的有机玻璃板贴在窗户的玻璃位置上。
e.根据装配部制作的台面和平面布置图，设置景观将平台上的平面布局进行划分，以绿色天鹅绒墙纸作为草地，粘在绿地上，用绿色油漆蘸大孔海绵进行干燥。切成条，贴在小灌木丛中作为绿化带。如果有水和湖的布局，可以用波纹有机玻璃板，背喷湖蓝漆，切成河或湖的形状在适当的位置。如果有较高的地面，则用有机玻璃板或PVC板一层地堆放和修整成型，然后涂上油漆填充空隙，晾干并覆盖草皮。用灰色背胶纸粘在道路上，白色背纸刻在道路线上，贴在上面。
f.制造景观剥去铜丝的皮，将铜丝扭曲成树干的形状，并喷上油漆。普通海绵蘸漆，干后粉碎，树枝的树干浸透在胶水中，粘在海绵丝上，变成一棵树。如果绿树，海绵可以浸在绿色的油漆里，如果秋天的树，可以浸泡在橙色的油漆中。柳树可以用0.2mm漆包线缠绕成树干和树枝，然后把它们粘在绿色线的末端。松树是把粗鱼线切成一个细条，用夹子夹着两根0.5mm漆包线挂起来，释放夹子，变成松树的形状，修剪一点，粘在绿色绒毛的末端即可。其他植物可以用切花和染色制成。用医用棉签或牙签做路灯。这种泡沫塑料可以用刀片雕刻成岩石的形状，并喷上油漆。
楼盘模型
g.设置景观根据植物、树木和建筑物的布局，将生产景观的花卉、树木和建筑物送到相应的地方。根据每座建筑物的位置，装配景观会打洞并安装小彩灯，这样建筑物模型的内部就会亮起来，就像打开了灯一样，并连接了这条线。
设计景观雕刻出建筑和道路的标志和特征，并制作了一个小标志，粘在相应的位置上。这样，整个建筑的沙盘模型就完成了。
What is the whole process of making a real estate sand table model? Today, Hangzhou Jingwen Sand Table Model Company will introduce to you.
a. First of all, the client should make an in-depth study on the real estate floor plan and construction drawing, and the assembly landscape will make the sand table according to the layout plan and the proportion of the sand table.
b. The paint spraying part adjusts the corresponding paint color according to the color of the architectural drawings, sprays it on the corresponding PVC board, and sends it to the design landscape for carving.
c. Design landscape Design the building structure in proportion to the construction drawings and break it down into different boards on the computer. According to the construction requirements, the landscape design includes wall patterns, roof tiles, windows, etc. Then it is sent to the engraving machine, the board of the building is carved on the PVC board, and then sent to the production landscape.
d. Production landscape According to the requirements of the design landscape, in accordance with the instructions and bonding methods, the chloroform is used to bond the PVC board into the approximate shape of the building. The shape of the window is directly engraved on the PVC board, and a thin transparent plexiglass board is attached to the glass position of the window.
e. According to the countertops and floor plan made by the assembly department, set the landscape to divide the plane layout on the platform, use the green velvet wallpaper as the grass, stick it on the green ground, and dipped the green paint in the large pore sponge to dry. Cut into strips and paste in small bushes as a green belt. If there is water and lake layout, you can use corrugated plexiglass plates, spray blue lake paint back, cut into the shape of a river or lake in place. If there is a high ground, use a plexiglass or PVC board to pile and trim the layers, then paint to fill the gaps, dry and cover the turf. Stick it on the road with gray adhesive paper, and engrave the white backing paper on the road line.
f. Manufacturing the landscape to strip the copper wire, twist the copper wire into the shape of a tree trunk, and spray paint. Ordinary sponges are dipped in paint and crushed after drying. The trunks of the branches are soaked in glue and stick to the sponge silk to become a tree. If the tree is green, the sponge can be dipped in the green paint, if the tree is autumn, it can be soaked in the orange paint. Willows can be wrapped into trunks and branches with 0.2mm enameled wire, and then glued to the ends of the green wire. The pine tree is to cut the thick fishing line into a thin strip, hang it with two 0.5mm enameled wires with a clip, release the clip, and change the shape of the pine tree, trim it a little, and stick it to the end of the green fluff. Other plants can be made with cut flowers and dyeing. Use medical cotton swabs or toothpicks as street lights. This foam can be carved into a rock shape with a blade and sprayed with paint.
?Building model
g. Set up landscapes According to the layout of plants, trees and buildings, send flowers, trees and buildings that produce landscapes to the corresponding places. According to the location of each building, the assembly landscape will make holes and install small colored lights, so that the interior of the building model will light up as if the lights were turned on, and this line is connected.
The design landscape engraved the signs and features of buildings and roads, and produced a small sign, which was glued to the corresponding position. In this way, the sand table model of the entire building is completed.
|
|
|
|
 |
 |
 |
 |
 |
|
|
|
