 新闻搜索 |
|
| 推荐图片 |
|
|
|
|
|
工业沙盘模型维护与普通建筑模型区别大 |
|
（时间:2020/8/7 16:09:10） |
工业沙盘模型制作材质有着一定的特殊性，需要特别的注重保养。工业沙盘模型由于制作的领域比较特殊，所以对于工业沙盘模型制作中的一些保养不是很到位，导致工业沙盘模型在存放的过程中发生的不同程度的损坏。其实保养工业沙盘模型有着特殊的保养方法，模型公司http://www.chnmodel.com制作的工业模型都运用的自己独特的保养方法，让工业模型使用寿命延长。
工业沙盘模型
工业模型定期检查
工业沙盘模型需要定期的进行各个方位检查，检查各部位的配件关系及有无损坏，对损坏的部分进行修复，气动顶料检查有无漏气现象并对具体的情况采取措施。模型公司制作工业模型时会使用水贴纸进行表面的防护处理，但长时间的存放也容易干裂，所以在定期保持水帖纸的湿度。
工业模型检查保养
工业沙盘模型经常保持模型内部结构件的润滑，并定期检查是否发生变形及表面损伤，一经发现，要及时更换，要对工业沙盘模型工作表面、运动、导向部件涂覆专业的防锈油，尤应重视对带有齿轮、齿条模型轴承部位和弹簧工业沙盘模型的弹力强度保护，以确保其始终处于最佳状态，对流道的清理应引起重视；对于热流道工业沙盘模型来说，加热及控制系统的保养有利于防止故障的发生。
工业沙盘模型在保养方面其实没什么特殊的方法，主要是要对工业沙盘模型进行润滑、防锈等一系列的处理。要让工业模型使用寿命更长，就需要我们细心的进行保养。(推荐阅读：杭州景文沙盘模型公司http://www.jwmoxing.com)
The materials used in the production of industrial sand table models have a certain degree of peculiarities and require special attention to maintenance. The industrial sand table model is made in a special field, so some maintenance in the production of the industrial sand table model is not in place, resulting in varying degrees of damage to the industrial sand table model during storage. In fact, there are special maintenance methods for maintaining industrial sand table models. The industrial models produced by the model company http://www.chnmodel.com all use their own unique maintenance methods to extend the service life of industrial models.
Industrial sand table model
Periodic inspection of industrial models
The industrial sand table model needs to be checked regularly in all directions, check the relationship between parts of each part and whether there is damage, repair the damaged part, check whether there is air leakage by pneumatic jacking and take measures for specific conditions. Model companies use water stickers for surface protection when making industrial models, but they are also prone to dry and cracked after long-term storage. Therefore, the humidity of the water stickers is regularly maintained.
Industrial model inspection and maintenance
The industrial sand table model always keeps the lubrication of the internal structural parts of the model, and regularly checks whether there is deformation and surface damage. Once found, it should be replaced in time. The working surface, movement and guiding parts of the industrial sand table model should be coated with professional anti-rust oil, especially Attention should be paid to the elastic strength protection of the bearing parts of the gear and rack model and the spring industrial sand table model to ensure that it is always in the best condition. The cleaning of the runner should be paid attention to; for the hot runner industrial sand table model, heating and The maintenance of the control system helps prevent malfunctions.
In fact, there is no special way to maintain the industrial sand table model. The main thing is to carry out a series of treatments such as lubrication and rust prevention on the industrial sand table model. To make the industrial model have a longer service life, we need careful maintenance. (Recommended reading: Hangzhou Jingwen Sand Table Model Company http://www.jwmoxing.com)
|
|
|
|
 |
 |
 |
 |
 |
|
|
|
